Bubbler Fountain info
P/C is Powder Coated. S/S is Stainless Steel.
All stainless steel models have stainless steel panelling both on the outside and inside including the nuts, bolts and screws. A compressor-mounting plate and the base of the refrigerated water cooler are also made from stainless steel, while water tanks come with either a 5 litre or 15 litre storage capacity. The electrical wiring is all double insulated for added protection and all water lines are insulated to prevent condensation.
All powder coated models have heavy gauge zincalume panelling and are fully powder coated both on the outside and inside. Apart from the stainless steel top, there is no panel that is not powder coated. These models all come with a heavy gauge stainless steel bas
Our RS60 P/C and RS60 S/S bubblers have a large 15 litre stainless steel water storage tank and produces 30 litres of cold water per hour.
Our RS40 P/C and RS40 S/S bubblers have a 5 litre stainless steel water storage tank and produces approximately 30 litre of cold water per hour.
Our FCJ-293 P/C and FCJ-293 S/S bubblers have a 3 litre stainless steel water storage tank and produces approximately 15 litre of cold water per hour.
These are the 3 basic types we recommend, they are all made here in W.A. and are in stock and ready to install. It is just a matter of working out which is most suited for your use. The FCJ-293 is the lightest use one, best for up to 20 people but if it will be in a heavy use area then you should be considering one of the RS models, they are a more robust commercial model.
We recommend fitting one of our water filter kits to preserve the life of the bubbler and to supply good safe quality drinking water.
Installation by our licensed plumber can be easily arranged. Some extra parts may be required and charged as extras.